Advertisement
Quick Links
Operating Instructions & Parts Manual
Portable Power Supply & Jump Starter
Model
80600, 80600R
!
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
• Read, understand and follow the instructions before using the product.
• The operating manual and safety information should be communicated in the native
language of the operator before use.
• Failure to do so may cause personal injury and or property damage.
Read this manual and follow all the Safety Rules and Operating Instructions before using this product.
!
WARNING
Capacity
6,000 mAh
US Patent No. 6,531,789 B1
US Patent No. 7,498,798 B2
SFA Companies
Advertisement
Related Manuals for Omega Omega Pro 80600
Summary of Contents for Omega Omega Pro 80600
- Page 1 Operating Instructions & Parts Manual Portable Power Supply & Jump Starter Model Capacity 80600, 80600R 6,000 mAh US Patent No. 6,531,789 B1 US Patent No. 7,498,798 B2 This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING •...
-
Page 2: Safety And General Information
WARNING SAFETY AND GENERAL INFORMATION For your safety, read, understand, and follow the information provided with and on this Intelligent Jumpstarter. The owner and operator shall have an understanding of this product and safe operating procedures before attempting to use. Make certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product. -
Page 3: Operational Guidance
CHARGING THE JUMPSTARTER * At Home 1. Insert the USB wall adapter provided into an outlet and insert the USB plug into the wall adapter. Insert the micro USB plug into the Jump Starter charging port. 2. The LED's flash individually during charging. The unit is fully charged once all 4 power LED's are on. 3. Charge time to full capacity is based on size, see Specifications table for details. * In A Vehicle 1. Ensure that the vehicle electrical system is 12V. Do Not attempt to charge the unit from a 24V vehicle system. 2. Insert the USB plug into an appropriate 12V charging socket with USB output (not included). Insert the micro USB plug into the Jump Starter charging port. -
Page 4: Specifications
OPERATIONAL GUIDANCE CONTINUED 8. Remove the blue plug of Jump Starter cable block from the 12 V Jump Starter socket of the host and then remove the clamps of Jump Starter from the car battery. WARNING: DO NOT leave the host unit connected to a car battery for more than 15 seconds or the unit can catch fire. DISCONNNECT the unit within less than 15 seconds of use whether or not the car starts OR FIRE AND/OR INJURY COULD RESULT! NOTICE If the red and green lights on the black box of the Smart Jump Starter cable are not working during... -
Page 5: Replacement Parts
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. Looking for dependable automotive tools? Rely on Omega Lift Equipment for quality and long-lasting products.