Philips MCM2300 Short User Manual

MCM2300
Question? Question?
Contact Contact
Philips Philips
Short User Manual
Specifications are subject to change without notice.
2014 © WOOX Innovations Limited. All rights reserved.
Philips and the Philips' Shield Emblem are registered trademarks of
Koninklijke Philips N.V. and are used by WOOX Innovations Limited
under license from Koninklijke Philips N.V.
MCM2300_79_Short User Manual_V1.0
Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Contact
Philips
User Manual
To download the full user manual, visit
Always there to help you
www.philips.com/support. www.philips.com/welcome Register your product and get support at
Question?
Contact Philips
Short user manual
Before using your product, read all accompanying safety
information.
Note: Make sure that you have set the clock correctly.
If the selected alarm source is unavailable, this product switches to
FM mode automatically.
1
In standby mode, press and hold SLEEP/TIMER for 2 seconds.
2
Press / repeatedly to set the hour, and then press
SLEEP/TIMER to confirm.
3
Press / to set the minute, and then press SLEEP/TIMER
to confirm.
4
Press / to select an alarm source (DISC, USB or Tuner),
and then press SLEEP/TIMER to confirm.
5
Press / to set the alarm volume, and then press
SLEEP/TIMER to confirm.
To stop the alarm, press SLEEP/TIMER.
To deactivate the alarm timer, press SLEEP/TIMER until
disappears.
In standby mode: ON Standby mode
In Eco power standby mode: ON
Eco power standby mode
ON Eco power standby mode
Standby mode
Note: After this product stays inactive for 15
minutes, it automatically switches to the
normal standby mode.
After this product stays in the normal
standby mode for 15 minutes, it
automatically switches to the eco power
standby mode.
Program tracks
This function allows you to program 20 tracks in the desired
sequence.
1
In DISC or USB mode, press
2
Press PROG to activate the program mode.
3
Press / to select a track.
• F or MP3 tracks, press /
then press / to select a track.
4
Press PROG to confirm.
• R epeat steps 3 to 4 to program more tracks.
5
CD Press to play the programmed tracks.
To erase the program
Press twice.
1
In standby mode, press and hold CLOCK for more than 2
seconds.
2
Press / to select 24H or 12H hour format, and then
press CLOCK.
3
Press / to set the hour, and then press CLOCK.
4
Press / to set the minute, and then press CLOCK.
Note: If no button is pressed in 90 seconds during setting,
MCM2300 exits clock setting without saving earlier operations.
Start, pause, or resume play.
Stop play.
/ Select an album or a folder.
to stop play.
Press to skip to the previous or next track.
/
Press and hold to search backward/forward
within a track.
to select an album first, and
REPEAT Play a track or all tracks repeatedly.
SHUFFLE Play tracks randomly.
VOL +/-
Increase or decrease the volume.
MUTE
Mute or restore sound.
SOUND Select a preset sound equalizer.
DISPLAY
Adjust display brightness.
USB