Salus Smart Plug SP600 Installation Manual

Introduction
Smart Plugs go directly into an open outlet (like an extension
of the outlet) giving a user connected control over the device
Smart Plug
plugged into the equipment. Salus offers standardized Smart
Plugs for EU, UK and U.S. This product must be used with the
Model: SP600
Universal Gateway (UG600/UGE600) and the Salus Smart Home
App. Go to www.salus-smarthome.com for the PDF version
of the manual.
Product Compliance
This product complies with the essential requirements and other
relevant provisions of Directive 2014/30/EU, 2014/35/EU, 2014/53/EU
and 2011/65/EU. The full text of the EU Declaration of Conformity is
available at the following internet address: www.saluslegal.com.
Safety Information
Use in accordance with the regulations.
Designed to be used exclusively indoor.
Keep your device completely dry.
Disconnect your device before cleaning it with a dry towel.
Installation Manual
Ensure your socket switch
is permanently on.
V = 230AC 50HZ
A = 13 Amp max.
1
After initialisation the LED will start
flashing continuously.
3
SALUS Controls plc
SALUS House
Dodworth Business Park South,
Whinby Road,
Dodworth, Barnsley S75 3SP, UK.
Sales: T: +44 (0) 1226 323961
E: sales@salus-tech.com
Technical: T: +44 (0) 1226 323961
E: tech@salus-tech.com
www.salus-controls.com
SALUS Controls is a member of the Computime Group
Maintaining a policy of continuous product development SALUS Controls plc
reserve the right to change specification, design and materials of products
listed in this brochure without prior notice.
For PDF Installation guide please go to
www.salus-manuals.com
Issue Date: May 2016
V0011