Table of Contents
Advertisement
7
Configure an IP phone. The following des
phone. For details about other models, se
1. Enter the IP address of the IP phone i
can click OK on the IP phone to view
2. Enter the user name and password (d
and click Log In to access the web m
3. Click the Account tab. Set Register N
based on the data plan in step
address of the LAN port on the EGW1
4. Click Submit to finish IP phone config
You can choose Voice > Phone Alloc
You can choose Voice > Phone Alloc
system of the EGW1530B to view the
Verify the configuration according to the c
8
document.
Starting Configuration —— IMS/N
Planning SIP Server Data
a
Item
Type of the SIP server
address
SIP server address
SIP server type
SIP ser er t pe
Heartbeat detection
interval
Registration interval
Planning the Registration Group
b
Assume that the EGW1530B connects to the
user-by-user registration.
To obtain the registration group type, trunk re
name, IMS domain name, external numbers,
network carrier. When the SIP server type is
Registration
Registration
Group ID
Group Type
User-by-user
0
registration
User-by-user
1
registration
User-by-user
2
registration
...
...
a
. Se
Description
The address can be an IP
from the network carrier.
IP address or domain nam
network carrier. For examp
The options are NGN and
The options are NGN and
Interval for the EGW1530B
server, in seconds. The va
recommended.
Interval for the registration
this group to the SIP serve
The value ranges from 0 to
yp
Trunk Registratio
User ID
+8657187654321
+8657187654322
+8657187654323
...
scribes how to configure an eSpace 78xx IP
ee the appropriate administrator guide.
in the address box of Internet Explorer(You
the IP address of the IP phone).
default values: admin) of the administrator
anagement page.
Name to the user number of the IP phone
et SIP Server to 192.168.1.1 (default IP
1530B).
guration.
cation > IP Phone in the web management
cation > IP Phone in the web management
e registration status of the IP phone.
chapter Verifying Configuration in this
NGN Access Gateway
address and or a domain name. Obtain the type
me of the SIP server. Obtain the address from the
ple, the value can be 191.1.1.1 or m04.huawei.com.
IMS. Obtain the type from the network carrier.
IMS Obtain the t pe from the net ork carrier
B to send heartbeat messages to the active SIP
alue ranges from 10 to 900. The default value 60 is
n group to send registration messages for users in
er, in seconds.
o 14400. The default value 360 is recommended.
e IMS, and the registration group type is
egistration user ID, trunk registration user
, Authentication and Password, contact the
NGN, leave the IMS domain name blank.
,
on
Trunk Registration
User Name
+8657187654321@abc.
def.com
+8657187654322@abc.
def.com
+8657187654323@abc.
def.com
...
6
6
IMS Domain
Name
abc.def.com
abc.def.com
abc.def.com
...
Advertisement
Table of Contents
