HoMedics MCS-840HA Instruction Manual And Warranty Information page 5

NOTE: When
Demo Button
"POWER" button
For a brief demonstration of the features of the Massage
is pressed for
cushion, press the Demo button. The unit will briefly
first-time use, the
go through each function. Once completed, the unit
moving mechanism
automatically turns off. The L.E.D. light will blink to
will automatically
indicate active function.
move to the lowest
position before
Kneading Massage
starting a massage
Kneading is a deep massage.
program. After initial
use, mechanism
Massage Zones
will always park at
Choose from 3 preset zones in
lowest position. See
Rolling or Kneading where the
note below regarding
massage travels up and down in a
parking.
specific area of the back, full, upper
or lower. To select a program, simply
press the button and the L.E.D. will
illuminate. To deselect, press the
button again or press another button.
Spot Massage
While the unit is in Kneading
massage, press either button to stop
NOTE: The moving
and focus the Shiatsu action in one
massage mechanism
place. Once the unit is operating
always "parks"
in Spot Massage, you may adjust
or finishes in its
the mechanism position by holding
lowest position. It
down either button until the desired
will continue to this
position is reached. The Up Arrow
position after the
will move the mechanism upwards
power has been
and the Down Arrow will move it
turned off. If the
down. Once you release the button,
electrical supply is
the mechanism will stop in that
interrupted, when place.
power is restored,
the mechanism will
"park" or move to
its lowest position.
IB-MCS-840HA.indd 8-9
8
Shiatsu Elite
Massage Cushion
with Heat
Power Button
To turn on the massage functions, first press the POWER button.
The L.E.D. indicator will illuminate and confirm your selection. To
turn off the massage functions, simply press the button again. The
L.E.D. indicator will blink while the massage mechanism returns to its
lowest point and then it will turn off..
Neck and Shoulder Massage
To turn on the neck and shoulder massage, simply press the Neck
button and the LED light will illuminate.
Press the neck button again to reverse the direction of the massage.
To turn off, press the button a third time.
Height Adjustment
Press up/down arrows, when in use, to adjust the massage mechanism
position to your personal comfort level
Rolling Massage
Rolling is like two hands working slowly up and down your back.
Width Adjustment
While the unit is in Rolling massage, press this button to adjust the
distance or width between the massage heads. With each press, the
massage heads will move to the next available position.
Heat Button
For soothing heat, when massage is on, simply press the heat button
and the corresponding red L.E.D. light will illuminate. To deselect,
press the button again and the corresponding L.E.D. light will turn off.
For your safety, heat cannot be turned on if no massage program is
selected.
NOTE: There is a 15-minute auto shut off
on the unit for your safety.
9
5/20/15 3:38 PM