Sprint 250U Instruction Manual

Items Needed
1. Rocket with New Retrofitted Lid
2. Direct Connect Cable
3. USB Extension Cord
4. Polycarbonate Lid Insert
5. Sprint 250U 3G/4G modem
Installing the Sprint Modem
• On the Sprint 250U 3G/4G modem, open the USB connector all
the way until it clicks into place.
• Plug in the Direct Connect Cable into the front port
on the left side of the modem, as shown below.
• Locate the two
holes on the
polycarbonate
direct
insert, and drop
connect
slot
the direct connect
cable through
the left hole.
I N S T R U C T I O N G U I D E
Sprint 250U 3G/4G Modem
in the Rocket Lid
1.
USB
slot
utility.com
Inserting the
2. 3.
• Insert the modem's USB Connector through the center hole,
as shown below and fold the USB connector all the way to
hold the polycarbonate lid insert in place.
• Plug the USB extension cord into the modem, as shown
below.
4. 5.