Panasonic TC-32LX50 Service Manual page 16

TC-32LX50 / TC-26LX50
7.1.2. NTSC Picture VBS
Instrument Name
Remote controller
Video signal generator
1. Receive the 100% color bar.
(Screen mode: ZOOM or FULL Picture mode: DINAMIC AI: OFF AI Picture:OFF)
*BACK LIGHT +30
2. Enter Factory adjustment mode, and select MAIN_ADJ PICTURE.
2-1 Y signal check
Volume UP/DOWN key makes GAIN displayed under PICTURE to set.
Pushing the remote controller "OK" key for about 3 seconds, GAIN is suited to the
adjustment value automatically.
Connect to
Video input
Procedure
16
Remarks
Remarks
The Micon changes automatically to the mode
of the following in the adjustment mode.
At the factory trial purposes and pre-production,
the value of YMAX and GAIN are recorded.