Roland Music Atelier AT 5 Owner's Manual page 44

Record and Playback Your Performance
If you press the [Rec] button when a song has been selected from the floppy
disk, the selected song will be completely loaded into the AT-5 and the
Composer will enter into the recording standby mode.
If you wish to record a new song, press the Select [-] and [+] buttons to first
select "NEW SONG" before pressing the [Rec] button. Alternatively, eject
the disk from the floppy disk drive before pressing the [Rec] button.
fig.08-03
❍ If the following screen appears
The following message appears when the AT-5 contains performance data
that has not been saved to a floppy disk.
fig.08-10
● If you wish to erase the performance song
1.
Press the [Rec] button.
● If you wish to save the performance song on a floppy disk
1.
Press the [Reset] button to cancel the procedure.
2.
Save the song onto a floppy disk (p. 51).
❍ If the following screen appears
fig.08-05
When recording was automatically canceled because the memory limit was
reached.
fig.08-04
When the instrument's memory is nearing capacity.
44