Pci Card; Network Interface Controller - NEC Express5800/R110g-1E System Configuration Manual

SYSTEM CONFIGURATION GUIDE

6 PCI Card

Please refer to
can mount PCI card supported.
6.1

Network Interface Controller

Category
Adapter GbE
10GbE
SFP+
Module
NOTE:

When using ESXi 6.0, mix configuration of N8104-133 and N8104-128/153 is not supported.
NEC Corporation
–
NEC Express5800/R110g-1E
Supported PCI cards and Installable Slots
Product Name / Description
1000BASE-T Adapter
Broadcom ® BCM5718 Gigabit Ethernet Controller
PCIe 2.0 x1
Dual Port 1000BASE-T Adapter
Broadcom ® BCM5718 Gigabit Ethernet Controller
PCIe 2.0 x1
Dual Port 1000BASE-T Adapter
Intel® 82580 Gigabit Ethernet Controller
PCIe 2.0 x4
Quad Port 1000BASE-T Adapter
Broadcom ® BCM5719 Gigabit Ethernet Controller
PCIe 2.0 x4
NOTE:
- Network cables with RJ-45 plug covers cannot be used.
10GBASE Adapter (SFP+/2ch)
Broadcom NetXtreme II BCM957711 10G SFP+ Dual Port
Network Interface Card
PCIe 2.0 x8
NOTE:
- N8104-129 SFP+ Module is required to connect with an optical
cable.
- Up to 2 SFP+ Modules can be installed.
- One network adapter can be installed on RHEL 6 operating
systems.
Dual Port 10GBASE-T Adapter
Intel X540-BT2
PCIe 2.0 x8
SFP+ Module (10G-SR)
1 x SFP+ Module for N8104-128
Revision 7.0 – October 23, 2015
with regard to the position of PCI slot which
Part Number
N8104-138
N8104-132
N8104-145
N8104-133
N8104-128
N8104-153
N8104-129
34