Roland VIMA RK-100 Owner's Manual page 25

Removing the CD-ROM
1. Press the [CD EJECT] button to open the disc tray.
Remove the CD-ROM from the disc tray.
2.
If the disc tray does not open
If, due to a power failure or other problem, the disc tray fails to open when you press
the [CD EJECT] button, switch off the RK-100's power, then insert a straightened paper
clip or similar object into the emergency eject hole to forcibly open the disc tray.
fig.Eject Hole-e.eps
NOTE
Emergency Eject Hole
The emergency eject hole must be used only when the VIMA's power is switched
OFF. Using it while the power is on may damage the disc or cause serious problems.
Listening on the VIMA
25