NEXTGEN ROOM DIVIDER ASSEMBLY GUIDE Tools Required: Ratchet 17mm socket 13mm socket 13mm wrench Assembly Instructions: Step 1: Screw on wheels/leg levelers until snug Step 2: Bolt on the polls using M10x1.5x40 bolts provided and a 17mm socket. One Sided Two Sided Step 3: Connect the grids using provided hardware.
Page 4
NEXTGEN ROOM DIVIDER ASSEMBLY GUIDE Step 4: Place the base cover over the base frame. Step 5: Attach drains and leaf screens to trays. Step 6: Place trays on grid in #4 slots starting from the bottom and working up. The bottom tray should not have drains.