Get Started; Led Indicators - Simrad V3100 User Manual

5
24 |

Get started

The device starts up whenever the connected power source is ON.
It will operate automatically when the device has been properly
configured and GPS/VHF antennas are properly installed. The device
transmits its own ship positions depending on vessel´s moving
speed and should receive information of other vessels in the vicinity.
The operation status of the device can be observed with the LED
lights on the unit. Description of the LED indications is provided in
the following section.

LED indicators

Indicator Light
Power Green,
steady
Tx/Silent Green,
flashing
Orange,
steady
Rx Green,
flashing
SD Green,
flashing
Green,
steady
Error Red,
steady
Red,
flashing
Get started | V3100 User Manual
Description
The device has been powered up correctly.
By USB power, the Power LED does not light,
showing that the device is in low power mode.
The device is transmitting AIS data.
The flashing interval varies depending on
vessel speed.
The device is in silent mode, no AIS transmis-
sion at all.
The device is receiving AIS data.
SD card is being accessed.
SD card is inaccessible due to malfunction.
MMSI is not properly programmed.
A BIIT system error is detected, referring to
chapter "Built-in integrity test (BIIT) page 25,
or by USB power.