Setting Up The Web Camera - RocketFish RF-NBCAM User Manual

RF-NBCAM - combined.fm Page 4 Friday, August 11, 2006 11:27 AM

Setting up the Web camera

Installing the driver
Note: Install the driver first, then connect the Web camera to a USB port on your
computer.
Windows Environment
To install the Windows driver:
Insert the Rocketfish Installation CD into the CD drive in your computer.
1
The installation program automatically starts.
If the installation program does not start automatically, click Start, Run,
type D:\Setup.exe (where "D" is your CD drive), then press Enter. The
installation screen opens.
Click Driver, then follow the on-screen instructions.
2
Install DirectX from the CD, if necessary.
3
Note: To remove the Windows driver, click Start, All Programs, Rocketfish, then click
Uninstall. Follow the on-screen instructions to remove the driver.
4