Mitsubishi Electric WD-C657 Owner's Manual page 53

Set Up NetCommand Control of an A/V Receiver
Note:
1
2
AVR screen overview
1.
commands the TV can send to the
A/V receiver when "learned"
2. A check under Learn/Name means the TV has
"learned" the command to switch the A/V receiver to the
input.
3. Input1 through Input4 are placeholder names for A/V
receiver inputs. Use this screen to assign meaningful
names , e.g., the name of the A/V receiver input.
4. Match up devices connected to the TV inputs with
audio inputs on the A/V receiver.
Setup to Control the A/V Receiver's Power
and Volume Functions
Input Selection
Inputs > AVR
3
4
6. NetCommand
TV's
AVR
ENTER
MENU
Power On
On
Power On
A/V receiver's
By completing "learning" for the power key,
NetCommand now operates the power function for
the A/V receiver.
Point the TV's remote control at the TV to control
the A/V receiver.
-
Auto Output Sensing
Learn
AVR
Inputs
AVR
AVR
TV's
ENTER
A/V Receiver (AVR)
screen. Perform
NetCommand IR
"learning" for A/V
receiver power and
volume keys.
POWER POWER ON
Power On
CANCEL
TV's
POWER OFF
TV's
POWER OFF
EXIT
53
TV
AVR
Power
-
Power Off