Related Manuals for LiteOn AP900 series
Summary of Contents for LiteOn AP900 series
- Page 1 CRUISE CONTROL & SPEED LIMITER AP 900 Series SL900 Series 231.000xxx rev.1.0...
- Page 2 CRUISE CONTROL & SPEED LIMITER AP 900 Series SL900 Series 231.000xxx rev.1.0...
- Page 3 CONTENTS: Chapters 1 Product variants……….……………………………….……….… 2 2 Cruise Control Safety Features ……………………….……..…… 3 3 Operating Instructions………………...…………..….…………… 4 3.1 Speed Limiter………………………………………..…..………… 4 3.2 Cruise Control..…………………………………………...……… 6 4 System Diagnostics………………………………..…….………… 8...
- Page 4 CONTENTS: Chapters 1 Product variants……….……………………………….……….… 2 2 Cruise Control Safety Features ……………………….……..…… 3 3 Operating Instructions………………...…………..….…………… 4 3.1 Speed Limiter………………………………………..…..………… 4 3.2 Cruise Control..…………………………………………...……… 6 4 System Diagnostics………………………………..…….………… 8...
- Page 5 PRODUCT VARIANTS: 1.1 SL900 / SL900C SPEED LIMITER SL900 Speed Limiter will operate solely as a speed limiter to 1 preprogrammed fixed maximum speed value. The programming of the Speed Limit needs to be executed during the product installation by an authorized dealer. Adding a Command Module to this device will give the product the additional functionality to set, increase, decrease, resume, memorize and cancel other speed limit values below the fixed maximum speed limit.
- Page 6 CRUISE CONTROL SAFETY FEATURES: SYSTEM DIAGNOSTICS: The cruise control is fitted with numerous safety features, which will disengage the cruise control in the following situations: The Cruise Control has integrated self-diagnostics. The self-diagnostics will send a 1. When pushing the brake pedal. code via the buzzer when the system disengages automatically for safety reasons 2.
- Page 7 DECEL (-) Press and hold the RES/- key after the Cruise Control is engaged and the vehicle will decelerate at a controlled rate of 2,5 km/hr/sec. The Cruise OPERATING INSTRUCTIONS Control will reset to the current vehicle speed when the RES/DEC key is released.
- Page 8 ACCELERATE(+) 3.2 CRUISE CONTROL Press and hold the SET/+ key after the Speed Limiter is engaged and the ON / OFF: speed limit value will increase at a controlled rate of 2,5 km/hr/sec. The Speed Limiter will reset to the current vehicle speed when the SET/+ key is Pressing the ON/OFF key for less than 1 second will turn the Cruise pressed.