Connecting to External Devices
Connecting to VCR/DVD
1.
Connect the video/audio cable as shown in the figure below and then connect the power cord (See page 9).
A
When using the RCA cable.
Connect the input terminal with a
•
proper colour match.
Rear side of
the Product
VIDEO
OUT
VCR/DVD
2.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
Or, press the INPUT button at the top side of the product.
INPUT
ENTER
A
When connecting with a RCA cable.
• Select AV
B
When connecting with a S-Video cable.
• Select AV
Each time you press the Input button it will change to AV
HDMI.
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
Note
• In case the RCA cable is connected simultaneously as S-Video cable is connected, S-Video
cable is first.
Rear side of
the Product
RCA Cable
(Not included)
AUDIO
OUT
VCR/DVD
When using the S-Video cable.
B
Connect to the S-Video input terminal to
•
watch high image quality movies.
RCA Cable
(Not included)
VIDEO
OUT
Component
10
S-Video Cable
(Not included)
AUDIO
OUT
Input
AV
Component
RGB
DVI
HDMI
MENU
RGB
DVI