Table of Contents
Advertisement
User Controls
English ...
Lamp Hour Reset
Press the
button after choosing "Yes "to turn the lamp hour
c ounter to 0 hours.
Security
Press
to start "Security" setting. If the "Security" function is
enabled, your must enter "Administrator Password" first before
Security setting.
Security
This projector provides an excellent security function
for the administrator to manage the usage of the
projector .
Select "On" to enable the security function. User
have to enter password depending on the " Security
Mode" . Please refer to "User Password" section for
details.
Select "Off" then user can switch on the projector
without password request.
Once the security function is enabled, the projector
will request user to enter password when switch
on the projector. Both "User Password" and
"Administrator Password" can be accepted for this
dialogue.
Management
(Computer / Video
Mode)
Advertisement
Table of Contents
