Installation Instructions; Refrigerator - GE PSB42 Owner's Manual & Installation Instructions

Installation
Instructions
Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344 or visit our Website at: www.GEAppliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT
•
local inspector's use.
• IMPORTANT
and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer –
future reference.
• Skill level –
basic mechanical skills.
• Completion time –
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is not
covered under the Warranty.
REFRIGERATOR LOCATION
•
it will not run often enough to maintain proper
temperatures.
•
it will not perform properly.
•
•
loaded.
16
—
Save these instructions for
—
Observe all governing codes
15 minutes

Refrigerator

THE INSTALLATION SPACE
*Finished Width
6"
Electrical
85" max
Area
Finished
Opening
24"
5"
Water Supply
3 1/2"
*The finished cutout width must be:
Water And Electrical Locations
The opening must be prepared with the electrical
and the cold water supply located as shown.
The Cutout Depth Must Be 24"
The refrigerator will project forward, slightly beyond
adjacent cabinetry for standard installation.
Additional Specifications
required. An individual properly grounded branch
a properly grounded 3-prong electrical receptacle
recessed into the back wall. Electrical must be
located on the rear wall as shown.
NOTE:
recommended.
• The water line can enter the opening through
the floor or back wall. The water line should be
between the cold water line and water connection
location, long enough to extend to the front of the
shut-off valve in the water line is required.
42" Models 18"
48" Models 20"
5"
75" From Floor
to Bottom
of Electrical
Area
5"
3 1/2"
kit
49-60742-4