Configuring The Software; Touch Screen Calibration; Calibration For Windows 7 Professional And Embedded Posready 7; Calibration For Windows 8.1 Professional And Embedded 8.1 Industry Pro Retail - HP 9015 Hardware Reference Manual

3

Configuring the software

Touch screen calibration

HP recommends that you calibrate the touch screen before using the system to ensure that the touch point
registers on the screen where the stylus or finger touches the screen. If at any time you find that the touch
point is not registering properly, you may need to repeat the calibration process.

Calibration for Windows 7 Professional and Embedded POSReady 7

To calibrate the touch module in Windows 7 Professional and Embedded POSReady 7:
1. Open the Start menu, tap the Control Panel link and type "calibrate" in the Search box. Under Tablet PC
Settings, tap the Calibrate the screen for pen or touch input link. In the Tablet PC Settings dialog box,
tap the Calibrate button, then proceed to step 2.
2. Follow the on-screen instructions to press the target marks on the touch screen. At the end of the
calibration process, the touch module should be aligned with the video and the touch points will be
accurate.

Calibration for Windows 8.1 Professional and Embedded 8.1 Industry Pro Retail

To calibrate the touch module in Windows 8.1 Professional and Embedded 8.1 Industry Pro Retail:
1. Launch the Control Panel. You can type "Control Panel" in the Search box to access it.
2. In the Control Panel type "calibrate" in the Search box. Under Tablet PC Settings, tap the Calibrate the
screen for pen or touch input link. In the Tablet PC Settings dialog box, tap the Calibrate button, then
proceed to step 3.
3. Follow the on-screen instructions to press the target marks on the touch screen. At the end of the
calibration process, the touch module should be aligned with the video and the touch points will be
accurate.

Calibration for Windows 10 Professional and Windows 10 IoT Enterprise for Retail

To calibrate the touch module in Windows 10 Professional and Windows 10 IoT Enterprise for Retail:
1. Launch the Control Panel. You can type "Control Panel" in the Search box to access it.
2. In the Control Panel type "calibrate" in the Search box. Under Tablet PC Settings, tap the Calibrate the
screen for pen or touch input link. In the Tablet PC Settings dialog box, tap the Calibrate button, then
proceed to step 3.
3. Follow the on-screen instructions to press the target marks on the touch screen. At the end of the
calibration process, the touch module should be aligned with the video and the touch points will be
accurate.
Touch screen calibration 41