Wiring
3.2.2 Wiring to Terminal Block
Remove the terminal block before beginning the wiring operations.
To remove the terminal block, push downward the release lever located at the top of the
terminal block.
Release lever
for terminal block
Note:
Install the terminal block by inserting it all the way to its original position and pressing the lock
button on the bottom of the unit. Then confirm that the terminal block is securely attached and
cannot be removed.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
3-8
Lock button
<Bottom of unit>