Advertisement
Quick Links
ROSEN CHRYSLER SERIES
QUICK INSTALL GUIDE
1. Disconnect the vehicle's negative battery
4. Remove 4 Philips head bolts securing the radio
terminal.
2. Remove dash bezel around radio
5. Unplug radio harnesses and remove factory
3.Unplug AC controls
radio
6. Install supplied side mounting brackets using
8. Plug in all harnesses and re-assemble dash
included Philips screws
* Kit includes 2 different bracket types*
7. Plug in all supplied harnesses included in kit
make sure CAN module is properly connected
8. Mount the radio with the 4 OEM Philips bolts.
Note: Photos are taken from Jeep Patriot installation
Advertisement
Related Manuals for Rosen PP-CHRY-LINK
Summary of Contents for Rosen PP-CHRY-LINK
- Page 1 ROSEN CHRYSLER SERIES QUICK INSTALL GUIDE 1. Disconnect the vehicle’s negative battery 4. Remove 4 Philips head bolts securing the radio 6. Install supplied side mounting brackets using 8. Plug in all harnesses and re-assemble dash terminal. included Philips screws 2.
-
Page 2: Installation Guide
Enter the “Settings” menu INSTALLATION AND USE PP1005 Antenna, GPS, 5 meters Press “Keypad”, press “1120” then press “Enter” The Rosen Multi-Media Navigation Systems contain an PP1006 Ground plate, GPS antenna internal video player, which is not intended for viewing PP1007 Harness, line level pre-out w/sub by the driver.