Unassign A Global Hot Spare; Assigning The Dedicated Hot Spare - Dell PowerEdge S130 User Manual

NOTE: A global hot spare disk cannot be created if you have Linux RAID configured on the system.

Unassign a global hot spare

1. Enter the Dell PERC S130 Configuration Utility. See
2. Click Physical Disk Management → Select Physical Disk Operations.
3. Select a global hot spare disk from the drop-down menu.
4. Click the link Unassign Hot Spare.

Assigning the dedicated hot spare

1. Enter the Dell PERC S130 Configuration Utility. See
2. Click Virtual Disk Management → Manage Virtual Disk Properties → Manage Dedicated Hot Spares.
NOTE: Assign dedicated hot spare only from disk drives populated across slots 0-3 of the system. For information
about the disk connectivity for AHCI devices, see
see the system specific Owner's Manual at dell.com/poweredgemanuals.
3. Select the physical disk that is in the ready state from the drop-down menu.
4. Click the link Add Hot Spare Disk.
Entering the DELL PERC S130 Configuration
Entering the DELL PERC S130 Configuration
Disk connectivity for AHCI
Utility.
Utility.
devices,and for disks slot information,
33