RIDGID RD80763 Operator's Manual page 9

ASSEMBLY
wARNING:
If any parts are damaged or missing do not oper-
ate this tool until the parts are replaced. Failure to
heed this warning could result in serious personal
injury.
wARNING:
Do not attempt to modify this tool or create acces-
sories not recommended for use with this tool. Any
such alteration or modification is misuse and could
result in a hazardous condition leading to possible
serious personal injury.
wARNING:
To prevent accidental starting that could cause
serious personal injury, always disconnect the
engine spark plug wire from the spark plug when
assembling parts.
ATTACHING THE REAR PANEL
See Figure 2.
 Locate the rear panel and screws.
 Using the Torx wrench provided, secure panel to handle
using the screws.
torx
screw
hitch piN
9
hANdle
reAr
pANel
Fig. 
Axle
wAsher
wheel
Fig. 3