Installation Of I/O, Gateways And Encoder Interface Units Outside Irc5 Compact - ABB IRC5 Compact Product Manual

2 Installation and commissioning

2.11.2 Installation of I/O, gateways and encoder interface units outside IRC5 Compact

2.11.2 Installation of I/O, gateways and encoder interface units outside IRC5 Compact
Location
I/O, Gateways and encoder interface units can be mounted on mounting rails on
the outside of the IRC5 Compact controller. The location where these mounting
rails can be fitted is shown by the following illustration.
xx0900000368
A
Required equipment
Equipment
I/O units, Gateways or encoder inter-
face units
Application manual - DeviceNet
Circuit Diagram
Continues on next page
82
Screw holes for mounting rail for I/O, Gateways or encoder units
© Copyright 2009-2013 ABB. All rights reserved.
Art. no.
3HAC020676-001
3HAC031403-003
3HAC035738-001 Revision: E
Note
Specified in Definition of
I/O units on page 76.