Advertisement
Mechanical and Dismantling Instructions
Step3: Dismantling Loade : First, disconnect the 3 connectors
aiming in the figure, and then remove the 4 screws at both
side of the loader. (Figure 4)
CON4
CON5
Figure 5
2-2
Step4:Dismantling Front Panel:disconnect the connector aiming
in the figure, then release the snaps on the both side of F ront
panel and gently pull the panel out from the set. ( ( F igure 5&6)
Figure 4
Figure 6
CON1
CON2
CON3
Snap2
Snap1
Advertisement
