Features - RIDGID R884 Operator's Manual

FEATURES

PRODUCT SPECIFICATIONS
Length of Stroke ...................................................1-3/16 in.
Switch ..........................................................Variable Speed
Charger Input ................................... 120 V, 60 Hz, AC only
BASE (SHOE)
ASSEMBLY
SAW
BLADE
KNOW YOUR RECIPROCATING SAW
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BASE (SHOE) ASSEMBLY
The shoe assembly can be adjusted forward or backward
to take advantage of the unused portion of the blade, or for
special jobs requiring low blade clearance.
24V LITHIUM-ION BATTERY PACK
Strokes Per Minute ............................ 0-2,500 s/min. (SPM)
Motor .................................................................. 24 Volt DC
18V NICKEL-CADMIUM BATTERY PACK
Strokes Per Minute ............................ 0-1,900 s/min. (SPM)
Motor .................................................................. 18 Volt DC
SHOE
RELEASE LEVER
BLADE CLAMP
LOCK / RELEASE LEVER
BLADE CLAMP LOCK / RELEASE LEVER
Your saw has a blade clamp design that does not require
the use of a tool (blade wrench) when installing or removing
the blade.
LOCK-OFF BUTTON
Your saw is equipped with a "lock-off" button which reduces
the possibility of accidental starting. The lock-off button is
located on the handle above the switch trigger.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with
decreased trigger pressure.
8
SWITCH
TRIGGER
LOCK-OFF
BUTTON
Fig. 1