Auto Power Off
(Automatic switch off after
end of programme)
T o save energy, the dishwasher is
A u t o P o w e r O f f
switched off 1 minute after
the programme ends. You can also
change this setting.
Possible settings are:
˜:‹‹: The dishwasher does not
■
switch off automatically.
˜:‹‚: The dishwasher switches off
■
after 1 minute.
˜:‹ƒ: The dishwasher switches off
■
after 2 hours.
Note that with the settings ˜:‹‚
Note:
and ˜:‹ƒ the interior lighting 1" is
switched off. To activate the interior
lighting, press the ON/OFF switch (.
EmotionLight
(Interior lighting) *
* depending on the configuration of
E m o t i o n L i g h t
your specific dishwasher
EmotionLight 1" is the interior lighting
for your dishwasher. You can switch the
interior lighting on ":‹‚ or off ":‹‹.
Notes
Depending on the setting of
■
AutoPowerOff, the interior lighting is
either switched on or off.
Note that when the appliance is
■
switched on and the door is open,
the interior lighting will automatically
be switched off after 1 hour.
Operating the appliance en
Changing start programme
The Eco 50° programme for
environmentally friendly operation is
always preselected when the appliance
is switched on. You can change the
"Start programme" setting. With the
setting †˜:‹‹, the most recently
selected programme will always appear
when the appliance is switched on.
Tone volume
Whenever you switch the dishwasher on
or off, a signal sounds. You can adjust
the tone volume from †–:‹‹ - †–:‹„.
Button volume
When you are operating the dishwasher,
a signal sounds whenever a button is
pressed. You can adjust the volume of
the tone from ›–:‹‹ - ›–:‹„. If the
signal tone is annoying, set the value to
›–:‹‹ (button volume off).
Factory setting
You can reset all settings to the factory
setting.
37