Download Print this page
Wolf TS-30+ Operation And Maintenance Instruction Manual
Wolf TS-30+ Operation And Maintenance Instruction Manual

Wolf TS-30+ Operation And Maintenance Instruction Manual

Safety torch with led

Advertisement

Quick Links

Wolf ATEX Torch with LED Range
GB
Operation and Maintenance Instructions
Please retain – read before use
EC/EU Declaration of Conformity
The Wolf ATEX Torch with LED Range meets all relevant
provisions of the:-
a) 94/9/EC Explosive Atmospheres (ATEX Equipment)
Directive (up to 19th April 2016).
b) 2014/34/EU Explosive Atmospheres (ATEX Equipment)
Directive (from 20th April 2016).
By virtue of the issued EC/EU type examination certificate,
demonstrating compliance with all relevant harmonised
standards and essential health and safety requirements.
Wolf ATEX Torches with LED are self contained primary
cell powered torches with high power LED light sources
moulded in high impact strength plastic. The TS-30+ and
TR-30+ are approved as Group I, M2 equipment for
mining applications, Group II, Category 2 equipment for
use in zone 1 & 2 potentially explosive gases, vapours
and mists where the T4 temperature class permits and
zone 21 & 22 potentially explosive dusts where the
o
T130
C maximum surface temperature and IIIB dust
group permits.
The TS-35+ and TR-35+ are approved as Group I, M1
equipment for mining applications, Group II, Category 1
equipment for use in zone 0, 1 & 2 potentially explosive
gases, vapours and mists where the T4 temperature class
permits and zone 20, 21 & 22 potentially explosive dusts
o
where the T130
C maximum surface temperature and IIIB
dust group permits.
TP-312
For detailed information on applicable codes with battery
Photoluminescent
options, see attached table.
(Zone 1 & 2 only)
Do not open torch in Ex Areas.
Do not mix cells.
Do not use rechargeable cells.
Ensure torch is switched off when fitting the TP-300
LED module.
Damaged equipment should be repaired before
further use.
Caution – If fitting Polycarbonate lens, check
Ex atmospheres for compatibility.
Notified Body:
Baseefa Ltd., Rockhead Business Park,
Staden Lane, Buxton, SK17 9JN, UK.
Notified body number: 1180
EC/EU Type examination certificate:
Baseefa 07ATEX0091X
'X' condition – Dust layers must be prevented from
building up on the torch and it must not be left energised
and unattended in Zone 20 areas.
Harmonised Standards Applied:
EN 60079-0:2012 +A11:2013, EN 60079-11:2012
Ingress Protection Level: IP67 to EN60529:1992
The TS/TR-30+/35+ is certified compliant with the:-
a) 2004/108/EC EMC Directive (up to 19th April 2016).
b) 2014/30/EU EMC Directive (from 20th April 2016).
To the following harmonised standards
BS EN 55015:2006 +A2:2009 and BS EN 61547:2009
Alex Jackson - Managing Director
Wolf Safety Lamp Company Ltd.
Photobiological safety to EN 62471:2008
Risk Group 2
CAUTION: Possible hazardous optical radiation
emitted from this product DO NOT stare at
operating lamp. May be harmful to the eye.
Use only genuine Wolf replacements parts.
The Wolf Safety Lamp Co. Ltd has a policy of continuous product
improvement. Changes in design details may be made without prior notice.
TP-232 (Zone 1 TS-30+)
TP-237 (Zone 0 TS-35+)
TP-243
TP-316 & TP-316R
(Zone 1 TR-30+)
Non Glass Applications
(Zone 1 & 2 only)
TP-247
(Zone 0 TR-35+)
R-337
Zone 0
IECEx Approval
IECEx Scheme Certificate Number:
IECEx BAS 06.0089X
Models TS-30+, TR-30+
Ex ib IIC T4 Gb IP67 / Ex ib IIIB T130
Ex ib I Mb
TS-30+ Temperature Ambient: -20
TR-30+ Temperature Ambient: -30
Models TS-35+, TR-35+
Ex ia IIC T4 Ga IP67 / Ex ia IIIB T130
Ex ia I Ma
TS-35+ Temperature Ambient: -20
TR-35+ Temperature Ambient: -30
IEC Standards Applied: IEC 60079-0:2011,
IEC 60079-11:2011.
Ingress Protection Level: IP67 to IEC 60529:2001
Only use cell types as specified in instruction.
TS-30+
I M2/II 2GD Ex ib I Mb/IIC T4 Gb –20°C
Ta
40/55°C Ex ib IIIB T130°C Db
TR-30+
I M2/II 2GD Ex ib I Mb/IIC T4 Gb –30°C
Ta
40/55°C Ex ib IIIB T130°C Db
TS-35+
I M1/II 1GD Ex ia I Ma/IIC T4 Ga –20°C
Ta
40/55°C Ex ia IIIB T130°C Da
TR-35+
I M1/II 1GD Ex ia I Ma/IIC T4 Ga –30°C
Ta
40/55°C Ex ia IIIB T130°C Da
G (Gas): T4
LR20
D (Dust) T130°C
Temperature Ambient
Wolf H-20
TR -30°C
Ta
40°C
Cegasa Alkaline
TS -20°C
Ta
40°C
Duracell Alkaline
Duracell Industrial
Duracell Plus
Duracell Procell
Duracell Ultra
Energizer Alkaline
Energizer Industrial
Eveready Gold
Exide Alkaline
Hi-Tech Alkaline Professional
Kodak Alkaline
Pifco Optimax Alkaline
Rayovac Maximum
RS Alkaline
Sanyo Alkaline
Varta Universal Alkaline
Varta Alkaline Value Pack
Varta Electric Power
G (Gas): T4
LR20
°
C Db
D (Dust) T130°C
°
C to 40/55
°
C
Temperature Ambient
°
C to 40/55
°
C
Wolf H-20
TR -30°C
Ta
55°C
Duracell Ultra
°
C Da
TS -20°C
Ta
55°C
Energizer Alkaline
Energizer Industrial
°
C to 40/55
°
C
Eveready Gold
°
C to 40/55
°
C
100-20
20-0
Risk Group 2
CAUTION: Possibly hazardous optical radiation
emitted from this product. Do not stare at
operating lamp. May be harmful to the eye.
Flashing Red Indication
Wolf Safety Lamp Company
WOLF ATEX
Solid Red Indication
SAFETY TORCH
WITH LED
ATEX approved for explosive
gas and dust atmospheres
TS-30+ & TR-30+
TS-35+ & TR-35+
OPERATION AND
MAINTENANCE INSTRUCTIONS

Advertisement

loading

Summary of Contents for Wolf TS-30+

  • Page 1 Ingress Protection Level: IP67 to IEC 60529:2001 operating lamp. May be harmful to the eye. The Wolf Safety Lamp Co. Ltd has a policy of continuous product OPERATION AND improvement. Changes in design details may be made without prior notice.
  • Page 2 Sous réserve de changements dans les détails de conception. Veränderungen an Konzeptionseinzelheiten, dürfen ohne eine La política de Wolf Safety Lamp Co. Ltd es de mejora continua de Wolf Safety Lamp Co. Ltd har en policy för kontinuerlig virksomhedens produkter. Ændringer i produktets designelementer vorherige Ankündigung durchgeführt werden.

This manual is also suitable for:

Tr-30+Ts-35+Tr-35+