Assembly - HEALTH RIDER HRCCEX04210 User Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench
Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below
each drawing refers to the key number of the part, from the PART LIST on page 22. The second number refers
to the quantity needed for assembly. Note: Some small parts may have been preattached for shipping. If a
part is not in the parts bag, check to see if it has been preassembled.
M6 Washer
(25)–6
M8 Nylon
Locknut (56)–4
M6 x 16mm Button
Screw (85)–2
M6 x 38mm Hex
Screw (78)–4
M10 x 30mm Button
Screw (39)–1
M8 Flat
Washer (18)–4
M10 Nylon
Locknut (45)–4
M8 x 19mm Button
Bolt (43)–4
5
M8 Split
Washer (70)–4
M4 x 12mm Screw
(60)–2
M8 x 25mm Button
Screw (27)–4
M10 x 75mm Carriage Bolt (72)–2
M10 x 82mm Carriage Bolt (63)–2
.
M10 Split
Washer (69)–3
M6 x 16mm Hex
Screw (29)–4
M10 x 25mm Button
Screw (55)–2