Control 4 HC-200 Installation Manual

Home Controller
HC-200
Installation Guide
Supported Model
C4-HC200B-E-B-NR-1 Home Controller HC-200
Introduction
The Control4® Home Controller HC-200 provides options for controlling lights, home
theaters, distributed audio systems, distributed video systems, and other devices controlled
using various protocols, such as Infra Red (IR) and Serial (see IR Out description). This ver-
sion comes with an improved processor, new Factory Restore button, and Flash support for
the On-Screen Navigators.
It provides extensive media management services for audio and video sources, such as
CDs and DVDs stored in connected devices. It also allows you to use an external storage
device with USB support for media storage. It also includes multi-zone audio capabilities,
sending music to rooms throughout the home.
When the Controller and other system components are installed and configured, users can
control the system using a number of interfaces, such as: On-Screen Navigator (included) or
a System Remote Control (sold separately).
What's in the Box
The following items are included in your Home Controller box:
• Home Controller HC-200
• AC to DC power adapter with power cord
• IR emitters (4)
• Universal Mounting Plate
• Screws (4)
• Home Controller HC-200 Installation Guide (this document). Note: You can find this
and other related documents online in the Products pages.
Accessories Available for Purchase
• USB WiFi Adapter (C4-NWA-11G-USB)
• Rack-Mount Kit (C4-1URMK1-B)
• Serial Cable Kit (C4-CBL3.5MM-DB9)
Important Safety Instructions
1. Read and keep these instructions.
2. Heed all warnings and follow all instructions for this product in this and other Con-
trol4® documents included with or related to this product.
3. Improper use of this product may result in potential electric shock.
4. Do not use this product near water.
5. Never spill liquid of any kind on this product.
6. Clean this product only with a damp or dry cloth. Do not use liquid cleaners or aerosol
cleaners to clean the product.
7. Install this product according to the manufacturer's instructions.
8. Install this product according to the National Electrical Code ANSI/NFPA 70 and the
prevailing local codes and requirements.
9. This product should be operated with the type of power indicated on the marked label.
If you are not sure of the type of power available, consult your Control4 dealer or local
power company.
10. Slots and openings on a cabinet rack, and components used with this product are pro-
vided for ventilation, reliable operation, and protection from overheating of the product.
These slots and openings must not be blocked or covered.
11. This product should never be placed near or over a radiator or heat register, or in a
built-in installation unless proper ventilation is provided.
12. Never push objects of any kind into this product through cabinet slots because they
may touch dangerous voltage points or short out parts that could result in a fire or
electric shock.
13. Only use the attachments and accessories included with this product or recommended
by Control4.
14. Do not allow anything to rest on the power cord. Do not install or place this product
where people will walk on the cord.
15. Do not use extension cords with any products in a Control4 system.
16. If applicable, unplug this product during lightning storms or when unused for long
periods of time.
17. Do not exceed the maximum wire size (if specified) in this guide.
18. This product must be installed by qualified professionals only.
19. Do not attempt to service this product yourself except as noted in this guide. Opening
or removing covers of internal components may expose you to dangerous voltage
points or other risks.
20. Refer all servicing to qualified service personnel. Servicing is required when the ap-
paratus has been damaged or frayed in any way; for example, a power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into this product, this
product has been exposed to rain or moisture, this product does not operate normally,
or this product has been dropped.
WARNING! To reduce the risk of electrical shock, do not expose this apparatus
to rain or moisture.
AVERTISSEMENT! Pour réduire le risque de choc électrique, n'exposez pas cet
appareil à la pluie ou à l'humidité.
WARNUNG! Um das Risiko des elektrischen Schlages zu verringern, setzen Sie
diesen Apparat nicht Regen oder Feuchtigkeit aus.
Control4 Supported Devices
Control4 devices that communicate with this Controller include:
• Touch Screens—All types and sizes (such as portable, tabletop, and in-wall, or 10", 7",
5", and mini)
• LCD Keypads
• Wireless 2, 3, & 6 Button Keypads
• Wireless Thermostats
• Speaker Points®
• Audio Matrix Switch
• Multi Channel Amplifiers
• 4-Zone Amplifiers
• Multi Tuners (V1 or V2)
• Wireless Dimmers
• Wireless Switches
• Wireless Outlet Dimmers
• Wireless Outlet Switches
For a more information, refer to the Products pages at www.control4.com.
Requirements and Specifications
• If you are using the Ethernet networking option, the Ethernet network should be in
place prior to starting the installation.
• If you are using the WiFi networking option, you must install and set up the WiFi
adapter (sold separately) in order to complete the installation.
• Software required for configuration is Composer Pro.
The Home Controller HC-200 specifications are:
Model Number
Network Support
Media Recognition
Audio Playback Formats
Display
Power Requirements
Dimensions
Weight
Additional Resources
The following resources are available to provide you with additional support.
• Your Control4 Reseller
• Control4 Web Site: http://www.control4.com
• Composer online help
C4-HC200B-E-B-NR-1
Ethernet—required (included)
WiFi--optional, requires a WiFi adapter (sold sepa-
rately)
Online CD/DVD recognition and media information
service
MP3: 32kbps to 320kbps, CBR and VBR
LED indicators
100-240 VAC, 60/50 Hz, 0.50 A MAX
H x W x D: 1.44" (36.5 mm) x 8.55 (217 mm) x 5"
(127 mm) (with connectors and mounting plate)
1.8 lbs/0.82 kg