Ricoh Caplio R1v User Manual page 29

Auto Focus/Flash Lamp
Crosshair
5.
Gently press the shutter button all
the way.
The still image you have taken freezes
for a moment on the LCD Monitor and is
recorded.
Note
• Press gently to prevent camera shake when you press the shutter release button.
• The
camera again.
• When shooting in a dark place, the camera raises the focusing performance (auto focus
precision) by preliminary flashing immediately before shooting. This preliminary flashing is
skipped for shooting in no-flash mode.
• When the [LCD CONFIRM] is set to OFF in the setup screen, the still image shot will not be
displayed on the LCD monitor.
Reference
For how to change the image confirmation time, see P.101.
28
Before focusing
Focused
Focusing failure
mark indicates that blurring may occur. Hold the camera still and focus the
Color of Auto Focus/Flash Lamp
crosshairs
White
Green
Blink (red)
Off
On (green)
Blink (green)