Shooting A Still Image With Sound (Image With Sound); For Shooting - Ricoh Caplio GX Operation Manual

Shooting a Still Image with
Sound (IMAGE WITH SOUND)
You can shoot a still image with a voice
memo. After the still image is stored, voice
recording starts automatically and can con-
tinue for up to eight seconds. This function is
useful for adding comments on the status or
contents of subject. Even when shooting in
Scene Mode, you can record a voice memo
3
by displaying and setting the Shooting menu.
To shoot an image with sound, follow the
steps below.
1.
Turn the mode dial to 5
ing Mode) or A/M (Aperture Pri-
ority/Manual Exposure Mode).
Alternatively, turn the Mode Dial to
4 (Scene Mode), and select a
scene to have the camera ready.
2.
Press the M
The Shooting menu appears.
3.
Press the #$
between displays as required.
4.
Select [IMAGE WITH SOUND]
and press the O
5.
Press the !" !" buttons to select [ON]. !" !"
5 (Shoot-
5 5
M button.
M M
#$ buttons to switch #$ #$
O or $ $ $ $ button. O O
6.
Press the O O O O or # # # # button.
The setting for shooting with sound is
complete.
7.
If you pressed the # # # # button, also
press the M M M M button.
The Shooting menu disappears and the
cross-hair (shooting mark) appears.
8.
Press the shutter release button

for shooting.

After shooting, the voice mark appears on
the screen to indicate the recording status.
9.
Press the shutter release button
to stop recording.
• By default, your camera is set to OFF.
• When the shooting mode is set to Multi-
Shot (excluding S Multi-Shot and M Multi-
Shot), sound recording function is not
available.
• When shooting with sound, you cannot use
Auto Bracket or White Balance Bracket.
For how to play back sound recorded with a
still image, see P.88.
58