Epson WirelessHD User Manual page 13

Connecting
A
Connect an AV device to the WirelessHD Transmitter using the HDMI cable.
B
Connect the WirelessHD Transmitter's AC adapter to an electrical outlet and to
the connector on the WirelessHD Transmitter.
C
Turn on the WirelessHD Transmitter.
D
Playback a movie on the AV device.
E
Turn on the projector.
F
Change the projector's image to WirelessHD input.
c
To change the projector's image, press a change input button on the remote
control such as the
from the list of connected devices under HDMI Link.
If no image is projected, press the [Setup] button to reconnect.
For more information, see the User's Guide supplied with the projector.
Turn off the WirelessHD Transmitter if it is not being used for extended periods.
HDMI
button, or select the AV device you want to display
13 13