DSC C24-CAM54IR Quick Installation Sheet

C24-CAM54IR
Quick Installation Sheet
Package Contents
The following items should be included: If any of
these items are damaged or missing, please contact
your distributor immediately.
• C24-CAM54IR
• Stand
Black Y-cable
•
• DC cable
Ethernet cable
•
• Quick Installation Guide
12V 1A Power Adapter
•
Model C24-CAM54IR
Dimensions 72mm (W) x 72mm (H) x 20mm (D)
(without stand)
Operating -20° C to 45° C
Note: Camera must be brought online
Temperature
above 0°C.
Video H.264, MPEG4 and MJPEG
compression
Network 1 Ethernet 10/100BaseT (RJ45)
Interface
Storage
-20° C to 60° C
Temperature
LEDs 3
Power Adapter 12V/1A
Front - C24-CAM54IR
1. IR LED The LEDs can help you see clearly even at
night or in the dark environment.
2.
On (Green)- LAN/Wireless
•
Network
connection established.
(Green)
• Off - No active connection on the
corresponding LAN port, or not
associated to Wireless AP
• Flashing - Data is being transmitted
or received.
3.
On (Green)- Power On
•
POWER/
• Off - Power Off
WiFi
Blinking - Data is being transmitted
•
(Green)
or received.
• Blinking Low - Weak strength of WiFi
signal (1/2 Hz, SNR < 15 dB)
• Blinking Medium - Strength of WiFi
signal is normal (1/2 Hz, SNR < 15 dB)
Blinking High - Good strength of WiFi
•
signal (1/2 Hz, SNR < 15 dB)
4. WPS
• On - When the WPS function is
(Green)
failed, the WPS LED will be lit on for
5 seconds.
Off - WPS function is off.
•
• Flashing - WPS function is being
processed. If it is successful, the
WPS LED will be off.
Rear - C24-CAM54IR
1. LAN Port Use a standard LAN cable (RJ45 connectors) and
the customized Power over Ethernet (PoE)
adapter to enrol the camera on the device port of
the C24-HUB.
2. Reset This button has two (2) functions:
• Reboot. When pressed and released, the
C24-CAM54IR will reboot (restart).
• Clear All Data. This button can also be used
to clear ALL data and restore ALL settings to
the factory default values.
To Clear All Data and restore the factory default
values:
1. Power On.
2. Press and hold the Reset Button for 15
seconds.
3. Release the Reset Button. DO NOT POWER
DOWN until the network LED is lit.
The C24-CAM54IR is now using the factory default
values.
3. Microphone The built-in microphone is useful for bi-direction
voice conversation.