Royal Sovereign RBC-3100 Owner's Manual page 8

PRODUCT OPERATION (CONTINUED)
- Counterfeit Detection Methods
All methods are automatically on when the unit is powered up. To manually turn off any or all methods
see (CONTROL PANEL - LOCATED ON PAGE 5.)
- AUTO or MANUAL Start
The machine is preset to automatically start counting bills once placed into the hopper. To change to the
manual start mode, press "MNL", and insert the bills into the hopper, and press "RESTART".
- Bill Counting Mode
The bill counting mode is preset on type 2. To adjust the counting mode, press "SET" twice. Preset
display window will display "F". Use the keypad to select a type 1-3.
Type 1 will not count counterfeit or irregular bills and will stop counting to allow for the
•
removal of bill(s) in question, and allow re-insertion of all bills into the hopper to restart
counting from zero.
Type 2 will stop counting when a counterfeit or irregular bill is detected and include these bills
•
in the master count (shown on the count display)
Type 3 will count counterfeit or irregular bills and continue counting, unless there is a jam
•
error (either EA2 or EA3). In this case, bill(s) in question are counted, and the machine will
stop to allow re-insertion of all bills into the hopper to restart counting from zero.
3. Place bills into the hopper to begin counting; press "START" if in manual mode
7