Demonstration Program; Running Demonstration Program - B&B Electronics RS-232 Digital I/O Module 232SDD16 User Manual

Demonstration Program

The 232SDD16 Demonstration (SDD16) Program (IBM PC or
Compatible) provides the user with examples of how to receive and
transmit commands to the 232SDD16. The SDD16.EXE is the
executable program, the SDD16.BAS file is the source code in
QuickBASIC. The source code provides an illustration of how to
send and receive commands from the 232SDD16.
NOTE: This is a demonstration program only and not intended for
system applications.

Running Demonstration Program

Before you can run the demonstration program you must run the
install program in the Hard Drive Installation section. If you are
running Windows, exit Windows to DOS.
To run the program follow these steps from the DOS prompt:
1. Type CD \232SDD16 and press the <Enter> key.
2. Type SDD16 and press the <Enter> key.
232SDD16-1005 Manual
B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350
PH (815) 433-5100 -- FAX (815) 433-5104
27 28 232SDD16-1005 Manual
B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350
PH (815) 433-5100 -- FAX (815) 433-5104