Onkyo HT-S5200 Quick Setup

QUICK SETUP

Model : HT-S5200
Thank you for purchasing this product.
This quick setup sheet shows the typical hookup method for connecting speakers
and AV components (DVD player, TV, cable/satellite receiver).
For more detailed hookup information and operating instructions,please see the
Instruction Manual.
First of all, turn on speaker set A.
Press the SPEAKERS [A] button on the front panel.
Make sure that speaker indicator A is shown on the
display.
Press the [RECEIVER] button, and then press the
remote controller's [SP A/B] button repeatedly to
select speaker set A.
Make sure that speaker indicator A is shown on the
display.
Turn off speaker set B when not in use. Indicator
should be off.
Speaker Set A Layout (Main Room)
Front Front
Left Left
Surround Surround
Left Left
Surround Surround
Back Back
Left Left
A B
TV TV
Front Front
Right Right
Center Center
Surround Surround
Listener Listener
Right Right
Surround Surround
Back Back
Right Right
On the
front panel
On the
remote
controller
On the
display
Powered
subwoofer
HTP-570 speaker package is shown
(C) Copyright 2009 ONKYO CORPORATION Japan. All rights reserved.

Speaker Hookup

Front right
speaker
Center speaker
Surround right Surround back
speaker right speaker
See the other side of this sheet
for the AV component hookup.
SN 29344936
Front left
speaker
Surround back Surround
left speaker left speaker
* 2 9 3 4 4 9 3 6 *