Download Print this page
Visonic CLIP-2 Installation Instructions

Visonic CLIP-2 Installation Instructions

The smallest passive infrared detector series

Advertisement

Quick Links

CLIP
CLIP
CLIP- - - - 1, 2, 3, 4
CLIP
1, 2, 3, 4
1, 2, 3, 4
1, 2, 3, 4
The Smallest Passive Infrared Detector Series
1. INTRODUCTION
1. INTRODUCTION
1. INTRODUCTION
1. INTRODUCTION
The CLIP series features the smallest and most elegant PIR detectors presently marketed.
The series includes four models that are slightly different in shape (Figure 1):
• CLIP-1: Wide Angle
• CLIP-2: Pet Alley
False alarms caused by environmental disturbances are virtually eliminated by a combination
of a light rejection filter and a low-noise pyroelectric detector.
All four CLIP models are equipped with a two-step alternate polarity pulse counter for
additional false-alarm protection. They provide reliable, long-life, trouble-free service.
Detailed specifications of the lenses employed in each model and mounting alternatives are
given in Figures 2 through 9 below.
Fig. 2. The CLIP-1 Coverage Pattern
Fig. 6. CLIP-4: Ceiling-Mount Curtain
2. SPECIFICATIONS
2. SPECIFICATIONS
2. SPECIFICATIONS
2. SPECIFICATIONS
OPTICAL
Lens Characteristics: See Figures 2 through 9.
Adjustment: Vertical 0° to -12° calibrated scale.
ELECTRICAL
Voltage: 10 to 16 VDC.
Current Drain: 12.5 mA at 12 VDC.
Alarm Output: Normally closed (fail-safe) contacts. 18Ω resistor in series
with contacts. Rating - 0.1A resistive / 30 VDC.
Tamper Output: N.C., rated at 50 mA resistive / 30 VDC.
Alarm Period: 2-5 seconds.
Pulse Counter: 2 position selector, 1 or 2 pulses (alternate polarity).
LED: Walk Test enabled or disabled with internal link.
Detector: Dual-element low noise pyroelectric sensor.
DE1161 CLIP-1, 2, 3, 4 Installation Instructions
• CLIP-3: Long Range
• CLIP-4: Curtain
Fig. 3. The CLIP-2 Coverage Pattern
Fig 7. CLIP-4: Overhead Curtain
Installation Instructions
Figure 4. The CLIP-3 Coverage Pattern
Fig. 5. CLIP-4: Wall-Mount Curtain
Fig. 8. CLIP-4: Curtain / Pet Alley
MOUNTING
CLIP-1, 2 and 3: Wall mounting.
CLIP-4: Wall or ceiling mounting.
Mounting Height: CLIP-1 and 3 - Up to 2.4 m (8 ft); CLIP-2: 0.7 to 1.5 m
(2.5 to 5 ft); CLIP-4: Up to 3.6 m (12 ft).
ENVIRONMENTAL
Operating Temperature: -10° C to 50° C (14° F to 122° F).
Storage Temperature: -20° C to 60° C (-4° F to 140° F).
RFI Protection: > 20 V/m to 1000 MHz.
PHYSICAL
Dimensions (H x W x D): 70 x 28 x 25 mm (2-3/4 x 1-1/4 x 1 in.).
Weight: 25 g (0.9 oz).
Color: White.
Fig. 1. The CLIP Models
Fig. 9. CLIP-4 on Internal Doorframe
1

Advertisement

loading

Summary of Contents for Visonic CLIP-2

  • Page 1 Adjustment: Vertical 0° to -12° calibrated scale. CLIP-4: Wall or ceiling mounting. ELECTRICAL Mounting Height: CLIP-1 and 3 - Up to 2.4 m (8 ft); CLIP-2: 0.7 to 1.5 m (2.5 to 5 ft); CLIP-4: Up to 3.6 m (12 ft). Voltage: 10 to 16 VDC.
  • Page 2 CLIP detectors should not be mounted on or within window frames built into external walls. Moreover, it is inverted (lens up) installation of the CLIP-2 (Pet Alley model) is advisable. mandatory to seal the wiring entry holes with sealing compound such as Set the scale between -4°...

This manual is also suitable for:

Clip-3Clip-4Clip-1