Samsung RS50 series User Manual page 39

Installation
Secure the filter in position.
• Fix the filter in position, as shown
in the figure on the right.
Connect the water line to the refrigerator.
• Remove the compressor cover of
the refrigerator.
• Connect the water line to the
valve, as shown in the figure.
• When connected, check if there
is any leakage.If any, repeat the
connection.
• Reattach the compressor cover of
the refrigerator.
Secure the water line.
• - Using clip "A", fix the water
line to the wall (the back of
refrigerator).
• - When the water line is secure,
make sure whether the water line
is not excessively bent, pinched
or squashed.
WATER TUBE
FILTER
TIGHTENING
BAND
WATER LINE
CONNECTION NUT
COMPRESSOR COVER OF
REFRIGERATOR
CLIP A
WATER LINE
FILTER
LOCK
STATIONS
English 39