Ports; Acoustic Profile; Software - Nvidia Quadro VCA Installation Manual

Visual computing appliance
Hide thumbs Also See for Quadro VCA:
Table of Contents

Advertisement

Quadro VCA specification
Caution:
1 Do not attempt to operate the VCA on two 120V/15A circuits. Any single failure of
either power supply or circuit leads to an overload condition.
2 It is recommended that you keep sustained current draw under 80% of the peak
rating. For example, the sustained current draw of a 20A circuit should not exceed
0.8*20 = 16A.
. .

Ports

Type
VGA
USB
Ethernet
2x 1 Gb Ethernet Ports
2x 10 Gb Ethernet Ports
1x FDR 56 Gbit / s InfiniBand
. .
Acoustic profile
Fan speed
Sound pressure level
Optimal
72 dBA
Full
83 dBA
Sound measurements were made in an independent laboratory. The ambient sound level was
21 dBA, which represents an empty office environment.
.

Software

The Quadro VCA comes pre-installed with the operating system, Iray and the VCA Manager.
Iray is licensed to run on the Quadro VCA only.
NVIDIA Quadro Visual Computing Appliance — Installation Guide
Description
Available
2x USB 2.0
One IPMI Ethernet Port. Optionally, the IPMI port can
be used to monitor and manage the system, rather than
a local keyboard and monitor.
Connection to 1 Gbit Ethernet network
Connection to 10 Gbit Ethernet network
Connection to a managed InfiniBand switch
Description
The system is at full load
Fans can set to full speed in the BIOS. Full speed can also
be triggered by the system.
. Software
©
NVIDIA Corporation

Advertisement

Table of Contents
loading

Table of Contents