Available Models; Specifi Cations - Bosch 8733951033 Installation & Operation Manual

6 | Bosch ZS Series Zone Sensors R1

3 Available Models

Sensor Model Description
ZS-1 Base Zone Temperature Sensor, no options
ZS-1H Base Zone Temperature Sensor, with humidity
ZS-1S Zone Temperature Sensor with override button, slidebar, occupied LED
ZSP-1 Zone Temperature Sensor, Push Button with LCD display, no options
ZSP-1H Zone Temperature Sensor, Push Button with LCD display, with humidity
ZSP-1HC Zone Temperature Sensor, Push Button with LCD display, with humidity and CO2
ZSM-1 Zone Temperature Sensor, Manager with LCD display, no options
ZSM-1H Zone Temperature Sensor, Manager with LCD display, with humidity
ZSM-1HC Zone Temperature Sensor, Manager with LCD display, with humidity and CO2
Table 2
4 Specifi cations
Sensing Element
Temperature (On Non-Humidity Models)
Temperature (On Humidity Models)
Humidity
CO2
Table 3
Power Requirements
Temperature Only
Temperature/CO2/ Humidity
Table 4
Power Supply
A controller supplies the Rnet sensor network with 12 Vdc @ 210 mA.
Additional power may be required depending on the application.
Communication
115 kbps Rnet connection between sensor(s) and controller
5 sensors max per control program (5 sensors can be daisy-chained to one controller
for power averaging)
Local Access Port
For connecting a laptop computer to the local equipment for maintenance and
commissioning
Environmental Operating Range
32° to 122° F (0° to 50° C), 10% to 90% relative humidity, non-condensing
Mounting Dimensions
Standard 2" x 4" electrical box using provided 6/ 32" x 1/2" mounting screws
Data subject to change
Range
-4°F to 122°F (-20° C to 50°C)
50° F to 104° F (10° C to 40° C)
10% to 90%
400 to 1250 PPM
1250 to 2000 PPM
Sensor Type
All Models
All Models
Installation & OperationManual
Bosch Part Number
8733951033
8733951034
8733951035
8733951036
8733951037
8733951038
8733951039
8733951040
8733951041
Accuracy
±0.35° F (0.2° C)
±0.5° F (0.3° C)
±1.8% typical
±30PPM or +/-3% of reading (greater of two)
±5% of reading plus 30 PPM
Power Required
12Vdc @ 8mA
12 Vdc @ 15 mA (idle) to 190 mA
(CO2 measurement cycle)
02.2018 | Bosch Thermotechnology Corp.