Download Print this page

Kyocera K2000 User Manual page 71

Advertisement

Camera Setting
Flash (On/Off): You can set the camera flash light on or off with this setting.
When the Flash is on, the camera flash will lit on when you take a picture.
Shutter Sound (Sound1/2/3/Off) : Allows you to select a shutter sound among
three kinds of shutter sounds or turn off the shutter sound. The sound makes
you feel the sense of taking a picture.
EV (-4/-3/-2/-1/0/+1/+2/+3/+4): You can set the EV (Exposure Value) and the
preview will look darker in lower EV and brighter in higher EV.
Banding (60Hz/50Hz): You can select the sampling bandwidth of the camera
sensor. When bandwidth increases, the memory size and the picture quality
will increase.
Cont. Shot : It allows you to take multiple continuous shots by pressing the
camera key. You can set this function off or take 1, 3, or 5 continuous shots.
Delay Timer : It allows you to take a picture with delayed timer. If you set the
delay timer at 5 sec, and press the camera key (center navigation key), it will
take a picture 5 seconds later. Off/5 sec/10 sec/15 sec
Image Setting: You can set image size and quality of your photo as following.
Image Size: 1280X1024, 640X480, 320,X240, 176X220 and 160X120 are
available.
Image Quality (Low/Normal/High): allows you to choose the JPEG quality.
The captured image memory size will increase if you choose higher quality.
White Balance: Auto/Daylight/Tungsten/Fluorescent/Cloud/Incandescence
Scene Mode: Allows you to select scene mode auto or night
Effect Setting: Allows you to set Image effect among 14 options
Normal
Grayscale
Sepia
Sepia Green
Sepia Blue
Color Invert
Gray Invert
Blackboard
Whiteboard
Copper Carving
Blue Carving
Embossment

Advertisement

loading