Table of Contents
Advertisement
Looper
You can record up to 38 seconds (MONO) of a performance and play back the recorded section over and over. You can also layer additional
performances with the recording as it plays back (overdubbing).
This lets you create real-time backing performances on the fly.
When the play screen (p. 4) is shown, pressing the [1]–[5] switch of the currently selected patch number (example: for U01-1, switch [1]; for U01-5, switch
[5]) turns the looper on. The same switch is used for all looper operations.
Record
Recording will start immediately
when you press the switch.
At the point where you want to
loop, press the pedal to switch to
playback.
Loop Playback Level Setting
If you set the playback level at 100 (default value), the volume of the
performance and that of the loop playback will be identical.
If you set the playback level to a value lower than 100, the volume of
the playback will be lower than that of the performance. As a result,
the sound of the performance won't get buried by the loop playback
sound, even if you record a multiple number of times.
1.
Press the [EFFECT] button.
2.
Turn knob [6] to select LOOPER.
3.
Turn knob [1] to specify the "PLAY LEVEL" value.
14
Loop Playback
Play back the loop.
Pressing the switch will switch to
overdubbing.
Press Twice
Switch Color
Color
Red
Orange
Green
Green
(blink)
Blue
MEMO
5 The recording time is up to 38 seconds (MONO).
5 The recorded content will be lost when you turn off the
Overdub
Record additional layers while
playing back the loop.
Press the switch to switch to
playback.
Stop/Clear
To stop, press the switch twice.
To clear the phrase, hold down the
switch for at least two seconds while
stopped.
Status
Record
Overdub
Playback
Stopped (phrase exists)
Stopped (no phrase)
Looper or turn off the power.
Hide quick links:
Advertisement
Table of Contents
