Disassembly; Rear Cover Removal; Chassis Removal; A Board Pwb Removal - Sony Trinitron KV-24LS35B Service Manual

2-1. Rear Cover Removal

=>
=>
Release the mains power cable from its securing posts.
Remove the rear cover fixing screws indicated. Pull the rear
cover away from the front beznet.

2-3. A Board PWB Removal

Release the 5 securing clips located at the side and front of the
chassis and slide the PWB clear of the bracket.
SECTION 2
<=
<=
=>
=>
Clip.

DISASSEMBLY

2-2. Chassis Removal

To remove lift the main bracket rear slightly and slide the
chassis away from the beznet. Ensure that the interconnecting
leads are released from their purse locks to prevent damage
being caused.

2-4. Service Position

Place the A Board PWB in the position indicated to carry out
servicing.
12