4-3. White Balance - Calibration
4-3-1. White Balance -Calibration
Factory
ADC / WB
4-3-2. Service Adjustment
- You must perform Calibration in the Lattice Pattern before adjusting the White Balance.
Color Calibration
Adjust spec.
1.
Source : HDMI
2.
Setting Mode : 1280*720@60Hz
3.
Pattern : Pattern #24 (Chess Pattern)
4.
Use Equipment : CA210 & Master MSPG925 Generator
Use other equipment only after comparing The result with that of The Master equipment.
Input mode
CVBS IN (Model_#1)
Component IN (Model_#6)
PC Analog IN (Model_#21)
HDMI IN
4-3-3. White Balance - Adjustment
Factory
ADC / WB - White Balance
AV Calibration
Comp Calibration
PC Calibration
HDMI Calibration
Calibration
Perform in NTSC B&W Pattern #24
Perform in 720p B&W Pattern #24
Perform in VESA XGA (1024x768) B&W Pattern #24
Perform in 720p B&W Pattern #24
(Low light)
Sub Bright
R offset
G offset
B offset
4. Troubleshooting
(High light)
Sub Contrast
R gain
G gain
B gain
Pattern
Lattice
Lattice
Lattice
Lattice
4-37