JVC DLA-X990R Quick User Manual page 12

3D images do not appear
Check
Do you see two images displayed side by
side?
Is an intermediate device (AV amplifier,
divider, etc.) in use?
Is the cable in use an HDMI-certified cable? Use an HDMI-certified high-speed cable.
Is the power of the 3D Glasses turned on? If you are using the PK-AG2 or PK-AG33D Glasses, turn on the
Are the 3D Glasses charged?
Are the 3D Glasses and 3D Synchro Emitter
too far away from each other?
Is the 3D Glasses and 3D Synchro Emitter
combination correct?
Compatibility Chart for 3D Synchro Emitter and 3D Glasses
3D Synchro Emitter
* Discontinued product
Please check with your authorized dealer for details.
3D video image looks unnatural
Check
Are there overlapping video images?
12
Set "3D Format" to "Side by Side"
Video images in the "Side by Side" format may not be recognized
automatically in the case of 3D video images.
Connect the source device to the projector directly, and check
whether there is any improvement in the condition.
If the condition improves, it is likely that this is not caused by
malfunction of the projector.
Also, use as short a cable as possible.
power manually.
Check whether the PK-AG1 battery of the 3D Glasses has run
out, and whether PK-AG2 and PK-AG3 are charged.
Position them at an appropriate distance.
Check the model name of 3D Glasses and 3D Synchro Emitter,
and use the correct combination.
Method: IR (Infrared))
PK-EM1 *
(Communication
Method: IR (Infrared))
PK-EM2
(Communication
Method: RF (Radio
frequency))
If there are overlapping video images partially, this is due to the
crosstalk phenomenon.
In this case, adjust "Crosstalk Cancel" accordingly.
If there are overlapping video images partially, this is due to the
crosstalk phenomenon.
This phenomenon often occurs when there are drastic changes
in the brightness.
In this case, set Lamp Power to "High"
Action
PK-AG1 *
(Communication (Communication
Method: IR (Infrared))
X
—
Action
"Troubleshooting"
in the
INSTRUCTIONS
This document
P. 5
This document
P. 5
Check the
instruction
manual of the 3D
Glasses and 3D
Synchro Emitter.
3D Glasses
PK-AG2 *
(Communication
Method: RF (Radio
frequency))
X
—
"Troubleshooting"
in the
INSTRUCTIONS
"Troubleshooting"
in the
INSTRUCTIONS
Refer to
—
PK-AG3
—
X
Refer to