Setting The Auto Measurement Interval; Specifying Display Contents; Specifying The Altitude Measurement Unit - Casio 3452 Operation Manual

Setting the Auto
Measurement Interval
You can select an auto measurement interval
of either five seconds or two minutes.
1.
Press (A).
This displays the Altimeter Mode setting
screen.
2.
Rotate the rotary switch to move the
pointer to [INTERVAL].
3.
Press the rotary switch.
4.
Rotate the rotary switch to select the auto
measurement interval you want to use.
[2 MINUTES]: Readings taken every
second for the first three minutes, and
then every two minutes for about 12
hours.
[5 SECONDS]: Readings taken every
second for the first three minutes, and
then every five seconds for about one
hour.
5.
Press the rotary switch to exit the setting
screen.
This returns to the Altimeter Mode setting
screen.
6.
Press (C) to exit the setting screen.
Note
The watch will automatically return to
●
the Timekeeping Mode if you do not
perform any operation in the Altimeter
Mode for about one hour while [5
SECONDS] is selected as the
measurement interval or about 12
hours while [2 MINUTES] is selected.
Operation Guide 3452

Specifying Display Contents

You can use the procedure below to display
an altitude graph in the Altimeter Mode.
1.
Press (A).
2.
Rotate the rotary switch to move the
pointer to [SCREEN].
Rotary Switch
3.
Press the rotary switch.
4.
Rotate the rotary switch to select a display
format.
[VALUE]: Displays the latest
measurement value only.
[GRAPH]: Displays a measurement value
and an altitude graph.
5.
Press the rotary switch to exit the setting
screen.
This returns to the Altimeter Mode setting
screen.
6.
Press (C) to exit the setting screen.
Specifying the Altitude
Measurement Unit
You can select either meters (m) or feet (ft) as
the the Altimeter Mode display unit.
Important!
When Tokyo (TOKYO) is the Home
●
City, the altitude unit is fixed as meters
(m) and cannot be changed.
Rotary Switch
1.
Press (A).
This displays the Altimeter Mode setting
screen.
2.
Rotate the rotary switch to move the
pointer to [UNIT].
3.
Press the rotary switch.
4.
Rotate the rotary switch to select the
altitude unit.
[METER]: Meters
[FEET]: Feet
5.
Press the rotary switch to exit the setting
screen.
This returns to the Altimeter Mode setting
screen.
6.
Press (C) to exit the setting screen.
Rotary Switch
22