Disassembly Procedure For The Unit - Panasonic HC-V520P Service Manual

8.3. Disassembly Procedure for the
Unit
No. Item
1 Side Case-L Unit
2 Top Case Unit
3 Front Case Unit
4 Wi-Fi P.C.B.
(HC-V520/V520M
only)
ESD P.C.B. Unit
(HC-V520M only)
5 Heat Radiation Plate-L
Unit
Lens Frame Unit
6 Lens Unit
7 SD Holder P.C.B.
Main P.C.B.
Fig Removal
(Fig. D1) 3 Screws (A)
(Fig. D2) 1 Screw (B)
3 Locking tabs
Side Case-L Unit
(Fig. D3) 1 Screw (C)
(Fig. D4) 1 Screw (D)
( -K/-S/-R model only )
3 Locking tabs
Top Case Unit
(Fig. D5) 1 Screw (E)
2 Screws (F)
FP6003 (Flex)
1 Screw (G)
1 Locking tab
1 Rib
(Fig. D6) Front Case Unit
(Fig. D7) FP3001 (Flex)
FP3201 (Flex)
2 Screws (H)
Wi-Fi P.C.B.
ESD P.C.B. Unit
(Fig. D8) 1 Screw (I)
1 Screw (J)
P6003 (Connector)
1 Screw (K)
(Fig. D9) 4 Locking tabs
FP6006 (Flex)
FP6004 (Flex)
1 Screw (L)
Heat Radiation Plate-L Unit
Lens Frame Unit
(Fig. D10) FP301 (Flex)
FP6008 (Flex)
2 Convexes
Lens Unit
(Fig. D11) 1 Screw (M)
3 Screws (N)
1 Screw (O)
Heat Radiation Plate Unit
P6401 (Connector)
FP6402 (Flex)
FP6001 (Flex)
(Fig. D12) 4 Locking tabs
Bottom Frame Unit
SD Holder P.C.B.
Main P.C.B.
No. Item
8 Monitor P.C.B.
Light Guide Plate Unit
LCD Panel Unit
9 Front Base
Barrier R
Barrier F
10 Mic Cover
Front Ornament Ring
Flare Cut Piece
Microphone Unit
Front Case
11 MOS Unit
IR Cut Grass
12 Iris Unit
13 2nd Stepping Motor
Focus Motor
3rd Stepping Motor
34
Fig Removal
(Fig. D13) 2 Screws (P)
8 Locking tabs
LCD Case (T) Unit
(Fig. D14) FP901 (Flex)
FP904 (Flex)
FP905 (Flex)
1 Screw (Q)
1 Locking tab
1 Projection part
Monitor P.C.B.
(Fig. D15) LCD Frame A
4 Locking tabs
Light Guide Plate Unit
LCD Panel Unit
(Fig. D16) Reflection Sheet
Light Guide Plate
Diffusion Sheet
Prism Sheet B
Prism Sheet A
LGP Holder
(Fig. D17) 3 Projection part
Lens Damper Rubber
4 Screws (R)
3 Ribs
Front Base
Barrier R
Barrier F
(Fig. D18) 2 Screws (S)
1 Locking tab
Mic Cover
Front Ornament Ring
Flare Cut Piece
Mic Sponge F
Mic Sponge M
Microphone Unit
Mic Sponge R
Front Case
(Fig. D19) 3 Screws (T)
MOS Unit
MOS Cushion
IR Cut Grass
Lens Unit
(Fig. D20) NOTE: (When Installing
the MOS Unit)
(Fig. D21)
(Fig. D22) 2 Ribs
Solder (24 points)
MOS FPC Sheet
4 Screws (U)
4 Ribs
(Fig. D23) Iris Unit
(Fig. D24) 6 Screws (V)
2nd Stepping Motor
Focus Motor
3rd Stepping Motor
(Fig. D25) NOTE:(When Installing)