Airlink101 TIM User Manual page 3

2. Front wheel installation:
Place the gasket (a) and the plastic cover (b) on
the front fork (4). Insert the fork (4) into the frame
(3).
Insert the stem of the front wheel tube (2) into the
front fork (4). Tighten all the construction with
screws.
3. Front handlebar installation:
Place the plastic cover (c) and gasket (b) on the
handlebar (5). Insert the handlebar into the frame
and push it so that you can tighten the screw.
4. Seat installation:
Position the seat (6) properly on the frame (3) and
secure it with screws. Slide the bolts of the plastic
footrests into the corresponding holes.
5. U-shape tube and rear handlebar
installation
Put the plastic cover (d) on the frame (3) and insert
the U-shaped tube (8) into the frame (3). Then,
place the metal part at the bottom and secure the
construction with the screw.
Insert the rear handlebar (9) into the guides of the
U-shaped tube (8) and secure it with screws.