Table of Contents
Advertisement
5. T
ECHNICAL
Product
Maintenance
EZwedge™ Tri User Manual Rev. 1
I
NFORMATION
Dust build-up reduces light output performance and can cause overheating. To maintain
optimum
performance,
However, usage and environmental conditions contribute to increasing the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the
external surfaces and vents.
4. Clean all external optics and transparent surfaces with a mild soap solution, ammonia-free
glass cleaner, or isopropyl alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
6. Softly wipe any dirt or grime to the outside edges of the external optics or transparent
surface.
7. Gently polish the external optics and transparent surfaces until they are free of haze and
lint.
Always dry the lens surfaces carefully after cleaning them.
clean
the
product
at
least
twice
a
month.
Page 19 of 22
Advertisement
Table of Contents
